Jinan Dark Intelligent Facilities Co.,Ltd
The Air Purifier can remove the pollution of [formaldehyde, benzene, ammonia, TVOC" caused by building decoration materials and indoor office furniture, and can not damage the completed building decoration and decoration project, and will not affect the normal use of the completed project. This product is suitable for living room, kitchen, bathroom, pet room, restaurant, hotel room, shop, office building, garage, etc.. Laser Smog Detector can be used to detect PM2.5, carbon dioxide (CO2), formaldehyde, TVOC and other air quality. Parameters to provide an accurate data base for a healthy indoor environment to better protect the health of the family.
Sale No. : SRLP-5533
Rated Voltage Frequency: 220-50Hz
Function: Remove the pollution of [formaldehyde, benzene, ammonia, TVOC"
Wind speed adjustment: High medium low
Power(W): 89 63 34
Air Volume(m^3/min): 300m^3
Noise(dB[A]): 58 54 45
Power Cord Length:1.8 m
1. After using this air purifier, the air quality reaches the safety standard in 24-48 hours.
2. "Patent formaldehyde purifier machine" filter life is greater than 12 months.
3. It can exhaust a variety of toxic gases such as "formaldehyde, benzene, ammonia, TVOC, PM2.5".
4. It can be applied in batches to mature products in decoration projects, and has the only technical advantage in China.
Component : function keys, display screen, switch key, USB charging port, temperature and humidity sensor and ventilation .
USB Adapter: 5V/1A
Power battery capacity: 1800mAh
Power supply continuous working time: about 5 hours
Screen size: 3.2
Screen resolution: 240x400
Q: Why can't the product boot normally?
Answer A: If the [power switch" is not turned on, please turn the [open key" on the back of the product to the right to turn it on;
Answer B: The battery is exhausted. Please charge the product and restart it.
Q: Why does configuring the network always fail?
Answer A: Wi-Fi password input error. Please be sure to enter the correct Wi-Fi password;
Answer B: It is not in the [distribution mode". Please press and hold the [function button" for 3 seconds to enter the distribution mode (the Wi-Fi icon flashes in the distribution mode);
Answer C: The router signal band is 5 GHz. Please switch the router signal band to 2.4 GHz and try again.
Q: Why is the detection value low?
A: It may be that the ventilation holes are blocked. Please make sure that the ventilation holes on both sides of the product body are not obstructed by obstacles.
Q: Why is the outdoor PM2.5 data not displayed?
A: If there is no network or the network is not available, please connect the product to the available network for use.